{"title":"MASKS","description":"\u003cp\u003eBrowse our MASKS collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"war-raptor-blank-headdress-2-4-week-turnaround","title":"WAR RAPTOR BLANK HEADDRESS- 2-4 WEEK TURNAROUND","description":"\u003ch3\u003eI will be offering these in several small batches! I'm doing that because this headdress takes a little more effort to produce than my other designs and don't want to take on too many at once.\u003c\/h3\u003e\n\u003ch3\u003eThere will be a 2-4 week wait for your mask to be made.\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! There will be more flash edges and extra material. Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching, flash removal and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed or heated and opened up. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! Please allow up to 3 weeks to ship out.***\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis means the time it takes for me to produce a batch of masks, not when the mask will arrive at your house.\u003cem\u003e I will update about production in the store news.\u003c\/em\u003e Any information about shipping status, production delays or anything else customers need to know will be updated there: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410362122415,"sku":"viz1787908893211","price":100.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank-headdress--2-4-week-turnaround_1.jpg?v=1787908897"},{"product_id":"fox-mask-ready-to-ship","title":"FOX MASK- READY TO SHIP","description":"\u003ch3\u003eI am having a little fun with the colors! I would advise a thorough scrub with dish soap if you want to paint over the mask without primer and use the plastic color as the base color I can't guarantee the paint will stick without it!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410362187951,"sku":"omu1787908893369","price":94.5,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410362220719,"sku":"eyx1787908893370","price":85.05,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410362253487,"sku":"ylf1787908893371","price":81.0,"currency_code":"USD","in_stock":true},{"title":"D","offer_id":47410362286255,"sku":"cnw1787908893372","price":82.35,"currency_code":"USD","in_stock":true},{"title":"E","offer_id":47410362319023,"sku":"kpk1787908893370","price":103.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/fox-mask--ready-to-ship_1.jpg?v=1787908898"},{"product_id":"war-raptor-blank-headdress-batch-2","title":"WAR RAPTOR BLANK HEADDRESS- BATCH 2","description":"\u003ch3\u003eI will be offering these in several small batches! I'm doing that because this headdress takes a little more effort to produce than my other designs and don't want to take on too many at once.\u003c\/h3\u003e\n\u003ch3\u003eThere will be a 2-4 week wait for your mask to be made.\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! There will be more flash edges and extra material. Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching, flash removal and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed or heated and opened up. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! Please allow up to 3 weeks to ship out.***\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis means the time it takes for me to produce a batch of masks, not when the mask will arrive at your house.\u003cem\u003e I will update about production in the store news.\u003c\/em\u003e Any information about shipping status, production delays or anything else customers need to know will be updated there: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410362351791,"sku":"fsp1787908893894","price":94.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank-headdress--batch-2_1.jpg?v=1787908898"},{"product_id":"miscast-panther-mask","title":"MISCAST PANTHER MASK","description":"\u003ch3\u003e\n\u003cem\u003e\u003cstrong\u003eThese masks are MISCASTS. They are flawed and will need work to fix. PLEASE do not buy a miscast if you expect a perfect mask. These are fixer-uppers, they are cheaper for a reason.\u003c\/strong\u003e \u003c\/em\u003eNo refunds.\u003c\/h3\u003e\n\u003ch3\u003e A - some of the ear\/cheek didnt fill but an easy fix\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eB - part of the cheek is hollow, will need to be opened and filled with epoxy so it's is no longer fragile\u003c\/h3\u003e\n\u003ch3\u003eC Grade-  both sides of jaw very shallow!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eYou will get the exact mask pictured.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cspan class=\"Apple-style-span\" style=\"font-size: medium;\"\u003e\u003cspan class=\"Apple-style-span\" style=\"font-weight: 800;\"\u003e\u003cbr\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\n\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003ci\u003e \u003c\/i\u003eSince the plastic used for this mask is heat sensitive meaning it is prone to mild warping.  Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat as mentioned above.  Store face up on a supportive structure underneath ( rolled up shirt or fabric works well ) or even better ....hang from your wall! \u003c\/h3\u003e\n\u003ch3\u003e\u003ci\u003eThese masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding\/metal working mask. Do not use this as a hockey\/airsoft\/paintball mask.  Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.\u003c\/i\u003e\u003c\/h3\u003e\n\u003ch3 style=\"font-style: italic;\"\u003e\n\u003ci\u003eBy buying this item you acknowledge you have read all the information above and have reviewed the \u003c\/i\u003e\u003ci\u003epolicies\u003c\/i\u003e\u003ci\u003e!\u003c\/i\u003e\u003ci\u003e\u003cb\u003e I always post on the SHOP UPDATE page if there are ever any delays, store issues or news about what's coming up.\u003c\/b\u003e\u003c\/i\u003e\n\u003c\/h3\u003e\n\u003ch3 style=\"font-style: italic;\"\u003e\u003ci\u003e\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003c\/i\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. \u003ci style=\"padding: 0px; margin: 0px;\"\u003eYou may have to expand the mask for a better fit\u003c\/i\u003e. You can do so using heat. \u003c\/b\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) \u003c\/b\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e- Only heat for around 5 minutes. \u003c\/b\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.\u003c\/b\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003ci\u003e \u003c\/i\u003eSince the plastic used for this mask is heat sensitive meaning it is prone to mild warping.  Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat as mentioned above.  Store face up on a supportive structure underneath ( rolled up shirt or fabric works well ) or even better ....hang from your wall! \u003c\/h3\u003e\n\u003ch3\u003e\u003ci\u003eThese masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding\/metal working mask. Do not use this as a hockey\/airsoft\/paintball mask.  Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.\u003c\/i\u003e\u003c\/h3\u003e\n\u003ch3 style=\"font-style: italic;\"\u003e\n\u003ci\u003eBy buying this item you acknowledge you have read all the information above and have reviewed the \u003c\/i\u003e\u003ci\u003epolicies\u003c\/i\u003e\u003ci\u003e!\u003c\/i\u003e\u003ci\u003e\u003cb\u003e I always post on the SHOP UPDATE page if there are ever any delays, store issues or news about what's coming up.\u003c\/b\u003e\u003c\/i\u003e\n\u003c\/h3\u003e\n\u003ch3 style=\"font-style: italic;\"\u003e\u003ci\u003e\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003c\/i\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cb style=\"padding: 0px; margin: 0px;\"\u003e This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. \u003ci style=\"padding: 0px; margin: 0px;\"\u003eYou may have to expand the mask for a better fit\u003c\/i\u003e. You can do so using heat. \u003c\/b\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) \u003c\/b\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e- Only heat for around 5 minutes. \u003c\/b\u003e\u003cb style=\"padding: 0px; margin: 0px;\"\u003e-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.\u003c\/b\u003e\n\u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410362384559,"sku":"min1787908893937","price":56.25,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410362417327,"sku":"qse1787908893938","price":28.35,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410362450095,"sku":"ppq1787908893939","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/miscast-panther-mask_1.jpg?v=1787908898"},{"product_id":"fox-mask-blank","title":"FOX MASK BLANK","description":"\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410362482863,"sku":"meu1787908894401","price":108.0,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410362515631,"sku":"qxj1787908894402","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/fox-mask-blank_1.jpg?v=1787908899"},{"product_id":"chophound-blank-mask-preorder-4-8-week-turnaround","title":"CHOPHOUND- BLANK MASK- PREORDER- **4-8 WEEK TURNAROUND**","description":"\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e4-8 week turnaround, this is a pre-order. You will receive a notification when your mask ships!  Please be patient, any delays will be updated in the store news section of this shop.\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through. You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410362581167,"sku":"tvr1787908894396","price":96.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound--blank-mask--preorder--4-8-week-turnaround_1.jpg?v=1787908899"},{"product_id":"war-raptor-blank","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThese masks are untrimmed! The eye holes will need to be dremeled out. Both have slightly sticky spots on the middle nose bridge but some light sanding should make it workable.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410362712239,"sku":"iqb1787908904160","price":84.5,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410362745007,"sku":"lnu1787908904161","price":79.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1.jpg?v=1787908909"},{"product_id":"chophound-blank","title":"CHOPHOUND BLANK","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410362908847,"sku":"bcp1787908910951","price":92.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank_1.jpg?v=1787908914"},{"product_id":"war-raptor-headdress-blank","title":"WAR RAPTOR HEADDRESS BLANK","description":"\u003ch3\u003eThese masks are untrimmed! The eye holes will need to be dremeled out, sorry!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel or heat if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! Please allow up to 3 weeks to ship out.***\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis means the time it takes for me to produce a batch of masks, not when the mask will arrive at your house.\u003cem\u003e I will update about production in the store news.\u003c\/em\u003e Any information about shipping status, production delays or anything else customers need to know will be updated there: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410362974383,"sku":"mdg1787908911047","price":89.7,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410363007151,"sku":"aoh1787908911048","price":102.7,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410363039919,"sku":"vlx1787908911049","price":94.9,"currency_code":"USD","in_stock":true},{"title":"D","offer_id":47410363072687,"sku":"xwd1787908911050","price":100.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-headdress-blank_1.jpg?v=1787908915"},{"product_id":"chophound-blank-mask","title":"CHOPHOUND BLANK MASK","description":"\u003ch3\u003eEyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363105455,"sku":"nhw1787908911035","price":96.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank-mask_1.jpg?v=1787908915"},{"product_id":"wavewolf-blank-mask-preorder-ships-junejuly","title":"WAVEWOLF BLANK MASK PREORDER ** SHIPS JUNE\/JULY**","description":"\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! This blank mask will not ship out until sometime in June\/July.** \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363138223,"sku":"gts1787908911386","price":108.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/wavewolf-blank-mask-preorder-ships-junejuly_1.jpg?v=1787908916"},{"product_id":"chophound-blank-2","title":"CHOPHOUND BLANK","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363170991,"sku":"vsq1787908911814","price":98.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank_1_2d7b94f1-47d6-4e6a-87e4-ff9d87b03a12.jpg?v=1787908916"},{"product_id":"custom-listing-wavewolf-blank-mask-preorder-ships-junejuly","title":"CUSTOM LISTING- WAVEWOLF BLANK MASK PREORDER ** SHIPS JUNE\/JULY**","description":"\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! This blank mask will not ship out until sometime in June\/July.** \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363269295,"sku":"qkz1787908914914","price":97.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/custom-listing--wavewolf-blank-mask-preorder-ships-junejuly_1.jpg?v=1787908919"},{"product_id":"war-raptor-blank-2","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThis mask is untrimmed! The eye holes will need to be dremeled out.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"REGULAR","offer_id":47410363334831,"sku":"riy1787908926315","price":79.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1_b2d41a10-9e2c-4c61-872e-c42fd5b9dd86.jpg?v=1787908930"},{"product_id":"chophound-blank-3","title":"CHOPHOUND BLANK","description":"\u003ch3\u003eEyes and flash will need to be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363400367,"sku":"raa1787908926389","price":85.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank_1_ca4b3936-d30a-419d-9673-bc82dd16157d.jpg?v=1787908932"},{"product_id":"fatalis-helm-blank","title":"FATALIS HELM BLANK","description":"\u003ch3\u003e\"The origin of the mutated, saber toothed beasts that roam the Wasteland isn't known. Some speculate they are the result of the war between the Green Runners and the Triopsid Warlocks, both sides warping apex predators into living weapons. Thankfully they are now rare and remains can be found scattered around the open deserts. The bones of the animals have taken on a strange texture as they age, becoming a curious mix of calcium, chitin, metal and mineral; some parts rusting as it ages and others forming a patina of unknown material. The skulls of these felines are highly prized as armor while the long bones are often used as weaponry. \"\u003c\/h3\u003e\n\u003ch3\u003eThis mask can be worn over the face so that you see through the eye holes or raised to sit with the view through the fangs.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e**READY TO SHIP. These will need to have the eyes and nose hole dremeled, flash will need trimming along with the usual minor patching. I will not include the canine fangs, sorry! I'm trying to wear out the main mask mold so it can be disposed of and the fang molds are long dead. This way you can make your own fang design! These are slightly thick but are absolutely wearable. Buyer will receive one of the masks pictured.**\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask with two (2) separately cast fangs. The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410363433135,"sku":"ptb1787908926495","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/fatalis-helm-blank_1.jpg?v=1787908932"},{"product_id":"chophound-blank-mask-2","title":"CHOPHOUND BLANK MASK","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003eONE OF THE MASKS IS A BIT POCKED. This one is cheaper and can be selected in the drop down menu. You will get this exact mask if selected.\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"NORMAL","offer_id":47410364121263,"sku":"zdf1787908932462","price":85.8,"currency_code":"USD","in_stock":true},{"title":"POCKED","offer_id":47410364154031,"sku":"hrs1787908932463","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank-mask_1_43d8a404-1e56-4acc-9053-87dfd1a0cf8a.jpg?v=1787908936"},{"product_id":"chophound-blank-4","title":"CHOPHOUND BLANK","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364186799,"sku":"xbs1787908932305","price":81.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank_1_07a87c73-e197-4423-a3de-066ba139ac55.jpg?v=1787908938"},{"product_id":"patreon-onlywavewolf-blank-mask-preorder-round-2-ships-septemberoctober","title":"!!PATREON-ONLY!!WAVEWOLF BLANK MASK PREORDER ROUND 2 ***SHIPS SEPTEMBER\/OCTOBER***","description":"\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! This blank mask will not ship out until sometime in September\/October** \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364219567,"sku":"eod1787908937591","price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/patreon-onlywavewolf-blank-mask-preorder-round-2-ships-septemberoctober_1.jpg?v=1787908941"},{"product_id":"fatalis-helm-blank-2","title":"FATALIS HELM BLANK","description":"\u003ch3\u003e\"The origin of the mutated, saber toothed beasts that roam the Wasteland isn't known. Some speculate they are the result of the war between the Green Runners and the Triopsid Warlocks, both sides warping apex predators into living weapons. Thankfully they are now rare and remains can be found scattered around the open deserts. The bones of the animals have taken on a strange texture as they age, becoming a curious mix of calcium, chitin, metal and mineral; some parts rusting as it ages and others forming a patina of unknown material. The skulls of these felines are highly prized as armor while the long bones are often used as weaponry. \"\u003c\/h3\u003e\n\u003ch3\u003eThis mask can be worn over the face so that you see through the eye holes or raised to sit with the view through the fangs.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e**READY TO SHIP. These will need to have the eyes and nose hole dremeled, flash will need trimming along with the usual minor patching. Some putty will be needed to fill in spots. I will not include the canine fangs, sorry! I'm trying to wear out the main mask mold so it can be disposed of and the fang molds are long dead. This way you can make your own fang design! These are slightly thick but are absolutely wearable. Buyer will receive one of the masks pictured.**\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask with two (2) separately cast fangs. The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364252335,"sku":"gkz1787908937968","price":82.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/fatalis-helm-blank_1_76a29f5c-4180-4022-9eee-1a523e075282.jpg?v=1787908942"},{"product_id":"wavewolf-blank-mask-preorder-round-2-ships-septemberoctober","title":"WAVEWOLF BLANK MASK PREORDER ROUND 2 ***SHIPS SEPTEMBER\/OCTOBER***","description":"\u003ch3\u003e\u003cstrong\u003e** This is a pre-order! This blank mask will not ship out until sometime in September\/October** \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364317871,"sku":"idb1787908942255","price":95.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/wavewolf-blank-mask-preorder-round-2-ships-septemberoctober_1.jpg?v=1787908946"},{"product_id":"war-raptor-blank-3","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThese masks are untrimmed! The eye holes will need to be dremeled out. One of the masks has a few holes in the nose blades ( pictured) You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"REGULAR","offer_id":47410364383407,"sku":"zye1787908943040","price":80.6,"currency_code":"USD","in_stock":true},{"title":"NOSE HOLES","offer_id":47410364416175,"sku":"qii1787908943041","price":76.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1_deab9ec5-b97c-4e26-89a9-0869096501ca.jpg?v=1787908949"},{"product_id":"war-raptor-blank-4","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThese masks are untrimmed! The eye holes will need to be dremeled out. Holes will need to be puttied, etc...\u003c\/h3\u003e\n\u003ch3\u003eYou will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364448943,"sku":"www1787908945494","price":97.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1_d8a0fb76-11ce-4cdd-891f-e17b9f06a504.jpg?v=1787908952"},{"product_id":"chophound-blank-5","title":"CHOPHOUND BLANK","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364481711,"sku":"ztu1787908948263","price":81.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank_1_3ec9199f-4ae0-4c40-bce4-df87e4a34f8c.jpg?v=1787908954"},{"product_id":"war-raptor-blank-5","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThese masks are untrimmed! The eye holes will need to be dremeled out. Holes will need to be puttied, etc...\u003c\/h3\u003e\n\u003ch3\u003eYou will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364514479,"sku":"kyv1787908950193","price":84.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1_69048017-b0c8-4c35-96cc-a1d50b33fb0c.jpg?v=1787908955"},{"product_id":"pre-order-diy-blank-sentinel-mask-4-8-week-production-time","title":"**PRE-ORDER** DIY BLANK \"SENTINEL\" MASK- 4-8 WEEK PRODUCTION TIME","description":"\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/Untitled-1.jpg?3073268756245260771=\u0026amp;width=700\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: http:\/\/missmonster.myshopify.com\/blogs\/news\/15162601-preorder-and-mask-info\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cstrong\u003eAs with all of my mask pre-orders there will be a 4-8 week production time. These will ship late October through November.\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis means the time it takes for me to produce a batch of masks, not when the mask will arrive at your house. I will update about production in the store news. Any information about shipping status, production delays or anything else customers need to know will be updated there: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e-Please order to your current, correct address. If you may be moving soon, please have it sent to a friend. I cannot send a mask to an address that is different from the one included in your order. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e-The photos of the finished mask is just to show what can be done. \u003cem\u003eYou will receive a white , unpainted mask with four unattached cast fangs.\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e- Painted, ready to wear masks will be available as they are completed.  I will post updates on my social media outlets when a mask is going to be available.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask with four (4) fangs. Fangs will need to be attached with epoxy or another appropriate glue. Each fang will fit back into the mouth easily, mask will have pegs that help them attach. The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The eye holes will come opened, but the buyer will need to sand\/remove the flash edges, fill any small surface air bubbles and open the nostrils themselves. \u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges.You can even use carving tools.  Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. I will have to cancel your order and ask you to re-order with the correct one. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003cbr\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Wash your mask with dish soap first to remove any oils or dirt. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- While there is no industry standard for handmade urethane mask thickness, i try to keep a good balance of durability and a light weight. Buyer may add to any thin spots with lightweight putty or subtract any thickness with a dremel or carving tool. Everyone has a personal preference for how thick\/thin they want their mask and there is no way to predict this preference between individuals.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic bands can be used for straps. Please be sure to roughen or \"score\" the inside part of the mask where the straps will attach. This will help the adhesive stick properly.\u003c\/h3\u003e\n\u003ch3\u003e- \u003cstrong\u003eThis urethane is sensitive to heat\u003c\/strong\u003e. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364580015,"sku":"nkt1787908953918","price":92.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/pre-order-diy-blank-sentinel-mask--4-8-week-production-time_1.jpg?v=1787908958"},{"product_id":"war-raptor-blank-6","title":"WAR RAPTOR BLANK","description":"\u003ch3\u003eThis mask is untrimmed! The eye holes will need to be dremeled out.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis piece is meant to be worn more as a headdress than a traditional mask, over the top of the head instead of the eyes. These are going to need a fair amount of filling in the tips of diamond shaped armor along the sides, the thing is a real pain in the ass to cast. It was either let buyers deal with a higher amount of finishing or charge a buttload to fill in all that stuff myself! Please refer to the close up photos of the blanks to get an idea of what the casts will look like. All of my raw casts require work to finish but this one will need a little more patching and resculpting in the sharp armor bits.\u003c\/h3\u003e\n\u003ch3\u003eThe opening measures 7.5\" across at the widest point and could be widened a bit more with a dremel if needed. It is 17\" long overall.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003ePLEASE read everything here carefully! Here is some info on what to expect from a pre-order: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"REGULAR","offer_id":47410364711087,"sku":"tua1787908956969","price":80.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/war-raptor-blank_1_cc16b60c-9da1-4975-835b-391dcc6888db.jpg?v=1787908962"},{"product_id":"axe-face-blank-mask-preorder-ships-in-december","title":"AXE FACE BLANK MASK- ** PREORDER SHIPS IN DECEMBER**","description":"\u003ch3\u003e\"AxeFace is summoned when you absolutely, positively need your enemy reduced to a bloody pulp. Made up of long sharp limbs, spikes and a helmet that can split a skull in two with a single headbutt, she is a for hire hunter who will also take on bodyguard, cache guarding and supply shipment protection work. AxeFace has been recently assigned to keep watch over the infamous Olde Pissy, propri\u003cspan class=\"text_exposed_show\"\u003eetor of the Hog Piss (tm) drink and head of the Slag Races to make sure he is not skimming of the top of his winnings. Sent by Brood\/Mother who is the A.I that runs Robodog Inc ( who gets a piece of the Slag\/Piss pie) she stands with Heagle Industry's RaptorLegs , both keeping a steely eye on every Slag run. In previous years, Brood\/Mother sent cyborgs who proved to be too easy to corrupt by dousing their circuits with Hog Piss (tm). Perhaps this year a flesh and blood professional maniac like AxeFace will stand firm! AxeFace often acts before thinking, eager to pulp flesh and shear steel but can be pacified if one can reach the back of her neck and administer a smoothing scratch under the feathers. \"\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan class=\"text_exposed_show\"\u003eNOTE ABOUT THIS DESIGN: please use a wall mounted or desk stand to prevent the cheek tines from warping under weight during prolonged display.\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e***THIS WILL SHIP IN DECEMBER, THIS IS A PRE-ORDER***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364776623,"sku":"msn1787908964854","price":108.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/axe-face-blank-mask--preorder-ships-in-december_1.jpg?v=1787908968"},{"product_id":"blank-fox-mask","title":"BLANK FOX MASK","description":"\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThese are ready to ship!\u003c\/strong\u003e\u003c\/span\u003e These are prices a bit lower than previous versions since the buyer will need to trim the eye holes and trim more flash. These are cast from the exact mold used to make the one seen in the HBO Watchmen series!\u003c\/h3\u003e\n\u003ch3\u003eBuyer will receive one of the masks pictured.\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410364874927,"sku":"pal1787908970287","price":91.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/blank-fox-mask_1.jpg?v=1787908975"},{"product_id":"chophound-blank-mask-4","title":"CHOPHOUND BLANK MASK","description":"\u003ch3\u003eReady to ship. Eyes and flash will need to be trimmed! You will get one of the masks pictured. Buyer will receive one of the masks pictured.\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410364973231,"sku":"jwa1787908971047","price":79.2,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410365005999,"sku":"lsi1787908971048","price":98.75,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410365038767,"sku":"kdh1787908971049","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank-mask_1_44b0129e-20ba-4530-849d-d361c02fef82.jpg?v=1787908982"},{"product_id":"blank-fox-mask-2","title":"BLANK FOX MASK","description":"\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThese are ready to ship!\u003c\/strong\u003e\u003c\/span\u003e These are prices a bit lower than previous versions since the buyer will need to trim the eye holes and trim more flash. These are cast from the exact mold used to make the one seen in the HBO Watchmen series!\u003c\/h3\u003e\n\u003ch3\u003eBuyer will receive one of the masks pictured.\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"EAR IMPERFECTION","offer_id":47410365104303,"sku":"iea1787908979837","price":74.55,"currency_code":"USD","in_stock":true},{"title":"REGULAR","offer_id":47410365137071,"sku":"tzg1787908979838","price":81.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/blank-fox-mask_1_01f0ccba-9873-4288-be38-d67591fa3bb4.jpg?v=1787908983"},{"product_id":"panther-blank-mask-custom-order","title":"PANTHER BLANK MASK- CUSTOM ORDER","description":"\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Any shipping delays will be posted in the store updates page!\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The eye holes will come opened, but the buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, remove mold voids and open the nostrils themselves. \u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e I also have a little information about my masks here. Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes- or immerse it in hot water. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365235375,"sku":"wjm1787908983619","price":70.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/panther-blank-mask--custom-order_1.jpg?v=1787908987"},{"product_id":"fatalis-helm-blank-3","title":"FATALIS HELM BLANK","description":"\u003ch3\u003e\"The origin of the mutated, saber toothed beasts that roam the Wasteland isn't known. Some speculate they are the result of the war between the Green Runners and the Triopsid Warlocks, both sides warping apex predators into living weapons. Thankfully they are now rare and remains can be found scattered around the open deserts. The bones of the animals have taken on a strange texture as they age, becoming a curious mix of calcium, chitin, metal and mineral; some parts rusting as it ages and others forming a patina of unknown material. The skulls of these felines are highly prized as armor while the long bones are often used as weaponry. \"\u003c\/h3\u003e\n\u003ch3\u003eThis mask can be worn over the face so that you see through the eye holes or raised to sit with the view through the fangs.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e**READY TO SHIP. These will need to have the eyes and nose hole dremeled, flash will need trimming along with the usual minor patching. I will not include the canine fangs, sorry! I'm trying to wear out the main mask mold so it can be disposed of and the fang molds are long dead. This way you can make your own fang design! These are slightly thick but are absolutely wearable. Buyer will receive one of the masks pictured.**\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask with two (2) separately cast fangs. The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365366447,"sku":"sxb1787908984758","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/fatalis-helm-blank_1_98ac6387-e4ba-4d05-bce4-d0294f79a5bb.jpg?v=1787908991"},{"product_id":"chophound-blank-mask-3","title":"CHOPHOUND BLANK MASK 2","description":"\u003ch3\u003eThese are untrimmed and a bit thicker than usual! A few have slightly ugly insides but they are workable. Eyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"NORMAL","offer_id":47410365530287,"sku":"zhj1787908966098","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank-mask-2_1.jpg?v=1787908995"},{"product_id":"blank-fox-mask-3","title":"BLANK FOX MASK","description":"\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThese are ready to ship!\u003c\/strong\u003e\u003c\/span\u003e These are prices a bit lower than previous versions since the buyer will need to trim the eye holes and trim more flash. These are cast from the exact mold used to make the one seen in the HBO Watchmen series!\u003c\/h3\u003e\n\u003ch3\u003eBuyer will receive one of the masks pictured.\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast urethane unpainted, unfinished mask . The finished pictures are just an example of what can be done.\u003c\/h3\u003e\n\u003ch3\u003e- Buyer will need to sand\/remove the flash edges, cut open the eye holes and fill\/remove any small surface air bubbles and open the nostrils themselves. This is a raw casting and will take work before it can be painted!\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Buyer may need to shape the mask using heat to get it to fit just right ( this is covered in the \"shaping\" section here )Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e- Please do not buy a mask if any of the above is an issue! I WILL NOT REFUND PRE-ORDERS.\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer and painted with acrylics , etc. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be added to the inside of the mask with a bra slide for adjustments. I also recommend gluing soft foam to the inside so that the mask can fit on your face better!\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRIGID URETHANE:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit \u003c\/strong\u003eyou can\u003cstrong\u003e \u003c\/strong\u003euse a heat gun or heat in the oven at around 175 degrees for a few minutes- (or immerse it in hot water) . Set the shape you want by dipping the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools. You may also need to dremel out the inside surface to make room.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365595823,"sku":"xir1787908993217","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/blank-fox-mask_1.png?v=1787909000"},{"product_id":"wavewolf-blank-mask-ready-to-ship","title":"WAVEWOLF BLANK MASK- READY TO SHIP","description":"\u003ch3\u003eREADY TO SHIP!\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365628591,"sku":"cbz1787908995896","price":92.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/wavewolf-blank-mask--ready-to-ship_1.jpg?v=1787908999"},{"product_id":"axe-face-blank-mask","title":"AXE FACE BLANK MASK","description":"\u003ch3\u003e\"AxeFace is summoned when you absolutely, positively need your enemy reduced to a bloody pulp. Made up of long sharp limbs, spikes and a helmet that can split a skull in two with a single headbutt, she is a for hire hunter who will also take on bodyguard, cache guarding and supply shipment protection work. AxeFace has been recently assigned to keep watch over the infamous Olde Pissy, propri\u003cspan class=\"text_exposed_show\"\u003eetor of the Hog Piss (tm) drink and head of the Slag Races to make sure he is not skimming of the top of his winnings. Sent by Brood\/Mother who is the A.I that runs Robodog Inc ( who gets a piece of the Slag\/Piss pie) she stands with Heagle Industry's RaptorLegs , both keeping a steely eye on every Slag run. In previous years, Brood\/Mother sent cyborgs who proved to be too easy to corrupt by dousing their circuits with Hog Piss (tm). Perhaps this year a flesh and blood professional maniac like AxeFace will stand firm! AxeFace often acts before thinking, eager to pulp flesh and shear steel but can be pacified if one can reach the back of her neck and administer a smoothing scratch under the feathers. \"\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003eReady to ship!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan class=\"text_exposed_show\"\u003eNOTE ABOUT THIS DESIGN: please use a wall mounted or desk stand to prevent the cheek tines from warping under weight during prolonged display.\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365759663,"sku":"owp1787908997575","price":117.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/axe-face-blank-mask_1.jpg?v=1787909002"},{"product_id":"robodogman-basic-blank-kit-opens-2-12-2020","title":"ROBODOGMAN BASIC BLANK KIT ( OPENS 2-12-2020)","description":"\u003ch3\u003e\u003cstrong\u003e--What is a Robodogman? This costume is based on a series of 1\/6 customized toys that i made. You can see them and read a little about them here: \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003ehttp:\/\/missmonster.myshopify.com\/collections\/art-dolls\/products\/wedgemore-the-robodogman-1-6-custom-doll\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003ehttp:\/\/missmonster.myshopify.com\/collections\/art-dolls\/products\/rolf-the-robodogman-1-6-scale-custom-doll\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003ehttp:\/\/missmonster.myshopify.com\/collections\/art-dolls\/products\/ratchet-the-robodogman-1-6-custom-figure\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003ehttp:\/\/missmonster.myshopify.com\/collections\/art-dolls\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e***THIS IS A PRE-ORDER. It will take 4-8 weeks for me to fulfill your order.\u003cem\u003e Please do not expect this to ship until late March to late April.\u003c\/em\u003e Please read my policy page and the mask care page for more details on ordering and policy***\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/Untitled-1_large.jpg?3073268756245260771\"\u003eAny information about shipping status, production delays or anything else customers need to know will be updated in the news section. Please refer to this before inquiring about an order you placed: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e-Please order to your current, correct address. If you may be moving soon, please have it sent to a friend. I cannot send a mask to an address that is different from the one included in your order. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e-This is a limited run. While i will produce batches of DIY Robodogman kits after the pre-order is over, it will be limited.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e-The photos of the finished mask is just to show what can be done. \u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e- I will NOT be making finished versions of this mask due to each mask needing to be sized to the individual wearer's head.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for a Robodogman helmet kit that includes one (1) top jaw, one (1) bottom jaw and one (1) back panel. \u003c\/h3\u003e\n\u003ch3\u003e- I am including build photos and tutorials since this kit can be challenging especially if the buyer wants to articulate the jaw. This can be found here ( please note that this tutorial includes the old soft optional head and chin parts- these are NOT being offered anymore): http:\/\/missmonster.myshopify.com\/blogs\/news\/robodogman-tutorials\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio.  Buyer will need to sand\/remove the flash edges, fill any small surface air bubbles and assemble.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges.You can even use carving tools.  Here is a little more detailed info. Buyer should add foam to the inside of the mask to customize the fit.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. I will have to cancel your order and ask you to re-order with the correct one. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask kit . The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Wash your mask with dish soap first to remove any oils or dirt. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- While there is no industry standard for handmade urethane mask thickness, i try to keep a good balance of durability and a light weight. Buyer may add to any thin spots with lightweight putty or subtract any thickness with a dremel or carving tool. Everyone has a personal preference for how thick\/thin they want their mask and there is no way to predict this preference between individuals.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic bands can be used for straps. Please be sure to roughen or \"score\" the inside part of the mask where the straps will attach. This will help the adhesive stick properly.\u003c\/h3\u003e\n\u003ch3\u003e- \u003cstrong\u003eThis urethane is sensitive to heat\u003c\/strong\u003e. Please keep it out of direct sunlight as it can warp under it's own weight when hot. \u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365792431,"sku":"adt1787908999072","price":118.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/robodogman-basic-blank-kit-opens-2-12-2020_1.jpg?v=1787909002"},{"product_id":"sentinel-miscast","title":"SENTINEL MISCAST","description":"\u003ch3\u003eTHESE ARE MISCASTS! THEY ARE IMPERFECT! These masks will need work to fix up, please do not buy if you are expecting a perfect mask!\u003c\/h3\u003e\n\u003ch3\u003eMask A- Distorted and thin in places\u003c\/h3\u003e\n\u003ch3\u003eMask B- Cheek did not fill all the way\u003c\/h3\u003e\n\u003ch3\u003eMask C- Distorted\u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410365825199,"sku":"qra1787908999721","price":51.0,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410365857967,"sku":"ulm1787908999722","price":46.5,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410365890735,"sku":"xrl1787908999723","price":48.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/sentinel-miscast_1.jpg?v=1787909003"},{"product_id":"axe-face-blank-mask-2","title":"AXE FACE BLANK MASK","description":"\u003ch3\u003e\"AxeFace is summoned when you absolutely, positively need your enemy reduced to a bloody pulp. Made up of long sharp limbs, spikes and a helmet that can split a skull in two with a single headbutt, she is a for hire hunter who will also take on bodyguard, cache guarding and supply shipment protection work. AxeFace has been recently assigned to keep watch over the infamous Olde Pissy, propri\u003cspan class=\"text_exposed_show\"\u003eetor of the Hog Piss (tm) drink and head of the Slag Races to make sure he is not skimming of the top of his winnings. Sent by Brood\/Mother who is the A.I that runs Robodog Inc ( who gets a piece of the Slag\/Piss pie) she stands with Heagle Industry's RaptorLegs , both keeping a steely eye on every Slag run. In previous years, Brood\/Mother sent cyborgs who proved to be too easy to corrupt by dousing their circuits with Hog Piss (tm). Perhaps this year a flesh and blood professional maniac like AxeFace will stand firm! AxeFace often acts before thinking, eager to pulp flesh and shear steel but can be pacified if one can reach the back of her neck and administer a smoothing scratch under the feathers. \"\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003eReady to ship!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan class=\"text_exposed_show\"\u003eNOTE ABOUT THIS DESIGN: please use a wall mounted or desk stand to prevent the cheek tines from warping under weight during prolonged display.\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410365989039,"sku":"ulk1787909003554","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/axe-face-blank-mask_1_8e29b2c7-0b86-4f77-a8a7-e1af16cb9f8e.jpg?v=1787909007"},{"product_id":"snarl-half-mask-painted","title":"SNARL HALF MASK- PAINTED","description":"\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyer will need to adjust the mask through gentle heat shaping ( see below) and by adjusting the attached strap slide. This mask will have some foam added for comfort but it may need more padding added with hot glue depending on individual fit. Please wear the elastic strap so that it goes over the widest part of the back of your head.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) painted, sealed and ready to wear urethane mask. It will come with an adjustable elastic strap and inside foam padding. \u003cstrong\u003ePadding may need to be shaved down or added to for the mask to fit correctly\u003c\/strong\u003e.\u003c\/h3\u003e\n\u003ch3\u003e- No part of this mask is actual metal.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio.\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003eBe sure to check out my mask info section to learn more about these masks: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e - This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.  You can use a heat gun or hair dryer to heat the \u003cstrong\u003eback\u003c\/strong\u003e of the mask until it becomes pliable. Set the shape you want by leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eBy buying this piece you are directly supporting an independent artist. Thank you!\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"RED\/PURPLE","offer_id":47410366087343,"sku":"mfz1787909007099","price":173.85,"currency_code":"USD","in_stock":true},{"title":"GREEN","offer_id":47410366120111,"sku":"coc1787909007100","price":176.7,"currency_code":"USD","in_stock":true},{"title":"PURPLE\/RED","offer_id":47410366152879,"sku":"xbc1787909007101","price":225.15,"currency_code":"USD","in_stock":true},{"title":"RED\/GREEN","offer_id":47410366185647,"sku":"lpz1787909007102","price":210.9,"currency_code":"USD","in_stock":true},{"title":"PURPLE","offer_id":47410366218415,"sku":"gqy1787909007103","price":199.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/snarl-half-mask--painted_1.jpg?v=1787909010"},{"product_id":"barn-owl-mask-blank-ready-to-ship","title":"BARN OWL MASK BLANK- READY TO SHIP","description":"\u003ch3\u003e\u003cstrong\u003eREADY TO SHIP BLANK MASK!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eHere is a list of artists to contact if you would like someone else to finish your mask for you:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eKelli Hovanes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"UFICommentActorAndBody\"\u003e\u003cspan\u003e\u003cspan class=\"UFICommentBody\"\u003esilvercicadadesigns@gmail.com\u003cbr\u003ewww.facebook.com\/silvercicadadesigns\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"UFICommentActorAndBody\"\u003e\u003cspan\u003e\u003cspan class=\"UFICommentBody\"\u003eKierstin LaPatka:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"UFICommentActorAndBody\"\u003e\u003cspan\u003e\u003cspan class=\"UFICommentBody\"\u003ehttps:\/\/www.etsy.com\/shop\/TheMonsterForge\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e- If you would like to make the eyes as seen in photos, you can find stereo speaker cloth here: www.amazon.com\/Parts-Express-Speaker-Grill-Cloth\/dp\/B0002ZPLM0\/ref=sr_1_5?ie=UTF8\u0026amp;qid=1446175875\u0026amp;sr=8-5\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e 1 3\/8\" (35mm) clear cabochons can be found here \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eJust use some clear epoxy glue to glue the back of the cabochon to the speaker cloth. Mix the glue and then mash the back of the glass down to the cloth until air bubbles squeeze out. Glue the cloth and eye to the back of the mask's eye hole. Your vision will be through the speaker cloth in the tear duct corner of the eyes. Be sure to trim the eye holes accordingly! The speaker cloth will significantly darken and obscure your vision so please be careful.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eIf you want the metallic effect, paint the back of the glass with a metallic acrylic, glass paint or marker paint and glue as normal once the paint is dry.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- I recommend using a strip of vertical foam between the eyes and up the forehead to fill out the back of the mask so it sits on your head properly. Otherwise if you use the black out cloth your eyes will be mushed against the back of the cloth and won't be super fun.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan class=\"Apple-style-span\"\u003e- \u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366349487,"sku":"pve1787909010867","price":62.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/barn-owl-mask-blank--ready-to-ship_1.jpg?v=1787909015"},{"product_id":"snarl-half-mask-rust","title":"SNARL HALF MASK- RUST","description":"\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyer will need to adjust the mask through gentle heat shaping ( see below) and by adjusting the attached strap slide. This mask will have some foam added for comfort but it may need more padding added with hot glue depending on individual fit. Please wear the elastic strap so that it goes over the widest part of the back of your head.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) painted, sealed and ready to wear urethane mask. It will come with an adjustable elastic strap and inside foam padding. \u003cstrong\u003ePadding may need to be shaved down or added to for the mask to fit correctly\u003c\/strong\u003e.\u003c\/h3\u003e\n\u003ch3\u003e- No part of this mask is actual metal.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio.\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003eBe sure to check out my mask info section to learn more about these masks: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e - This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.  You can use a heat gun or hair dryer to heat the \u003cstrong\u003eback\u003c\/strong\u003e of the mask until it becomes pliable. Set the shape you want by leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eBy buying this piece you are directly supporting an independent artist. Thank you!\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410366382255,"sku":"djy1787909011189","price":173.85,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410366415023,"sku":"lfx1787909011190","price":173.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/snarl-half-mask--rust_1.jpg?v=1787909015"},{"product_id":"snarl-half-mask-antique-bronze","title":"SNARL HALF MASK- ANTIQUE BRONZE","description":"\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyer will need to adjust the mask through gentle heat shaping ( see below) and by adjusting the attached strap slide. This mask will have some foam added for comfort but it may need more padding added with hot glue depending on individual fit. Please wear the elastic strap so that it goes over the widest part of the back of your head.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) painted, sealed and ready to wear urethane mask. It will come with an adjustable elastic strap and inside foam padding. \u003cstrong\u003ePadding may need to be shaved down or added to for the mask to fit correctly\u003c\/strong\u003e.\u003c\/h3\u003e\n\u003ch3\u003e- No part of this mask is actual metal.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio.\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003eBe sure to check out my mask info section to learn more about these masks: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e - This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.  You can use a heat gun or hair dryer to heat the \u003cstrong\u003eback\u003c\/strong\u003e of the mask until it becomes pliable. Set the shape you want by leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eBy buying this piece you are directly supporting an independent artist. Thank you!\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366480559,"sku":"bui1787909011350","price":193.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/snarl-half-mask--antique-bronze_1.jpg?v=1787909016"},{"product_id":"opens-friday-july-7th-2pm-pst-snarl-half-mask-blank-pre-order-will-not-ship-for-3-6-weeks","title":"(OPENS FRIDAY JULY 7TH 2PM PST) SNARL HALF MASK BLANK- *** PRE-ORDER! WILL NOT SHIP FOR 3-6 WEEKS***","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e***THIS WILL SHIP IN SEPTEMBER\/OCTOBER-THIS IS A PRE-ORDER*** \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003ePlease do not purchase a mask if you are unable to wait.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e----Here is a tutorial on opening the mouth for breathing:\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2609.jpg?v=1591826327\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2610.jpg?v=1591826357\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2611.jpg?v=1591826397\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2612.jpg?v=1591826443\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2613.jpg?v=1591826487\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2614.jpg?v=1591826513\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366611631,"sku":"fwy1787909017664","price":85.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/opens-friday-july-7th-2pm-pst-snarl-half-mask-blank--pre-order-will-not-ship-for_1.jpg?v=1787909022"},{"product_id":"dystopia-goggle-blank-ready-to-ship","title":"DYSTOPIA GOGGLE BLANK- READY TO SHIP","description":"\u003ch3\u003e\u003cem\u003e\u003cstrong\u003eYou will get one of the goggles pictured. These are slightly more flexible than usual...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003e\u003cstrong\u003e\" Dystopian goggles provide ocular protection as well as a HUD that will allow users to mark threats, steady aim and see the heat signatures of (most) wasteland mutants. Goggles can be outfitted with a plug-in that unlocks a night vision hack. Manufacturer is not responsible for potential hostile neuro-net system hacks as a result of interfacing with this equipment, user MUST employ the usual protective open-plug firewalls to prevent attacks.\"\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e( None of the above is meant to be taken literally. These goggles will not allow night vision or mutant spotting or any other silliness. This is a wearable prop. )\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cem\u003eThese blank goggles are in hand and ready to ship!\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eYES, these goggles can be seen through- you just need to trim the slats open and use a see through visor film or leave them open if you choose. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e. Buyer will need to trim flash, sand edges and finish to their own preference. Buyer will need to lightly sand and prime this urethane then wash with soap before applying paint. The slits in the goggle can be removed with an Xacto knife or a dremel.\u003c\/h3\u003e\n\u003ch3\u003e- These prop goggles are made for costuming and are not in any way meant to be used for protective purposes.\u003c\/h3\u003e\n\u003ch3\u003e- I strongly recommend that the buyer have familiarity with finishing masks, models, props or some crafting knowledge.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges.You can even use carving tools.  Here is a little more detailed info. Buyer should add foam to the inside of the goggle once it is finished to customize the fit.\u003cstrong\u003e Elastic straps with a bra slider will allow these to be worn. Some craft\/paint\/kit building knowledge is recommended.\u003cem\u003e I cannot provide build help beyond the info included here and in links provided.\u003c\/em\u003e \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e- I recommend lightly sanding the goggles and washing them with dish soap before applying primer- this will help the paint\/primer stick to the surface!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e- You can purchase sheets of the flexible visor material here: https:\/\/www.etsy.com\/shop\/IconProps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. I will have to cancel your order and ask you to re-order with the correct one. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/Untitled-1_large.jpg?3073268756245260771\"\u003eAny information about shipping status, production delays or anything else customers need to know will be updated in the news section. Please refer to this before inquiring about an order you placed: http:\/\/missmonster.myshopify.com\/blogs\/news\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366677167,"sku":"qwt1787909020704","price":49.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/dystopia-goggle-blank--ready-to-ship_1.jpg?v=1787909025"},{"product_id":"snarl-half-mask-antique-silver","title":"SNARL HALF MASK- ANTIQUE SILVER","description":"\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyer will need to adjust the mask through gentle heat shaping ( see below) and by adjusting the attached strap slide. This mask will have some foam added for comfort but it may need more padding added with hot glue depending on individual fit.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) painted, sealed and ready to wear urethane mask. It will come with an adjustable elastic strap and inside foam padding. \u003cstrong\u003ePadding may need to be shaved down or added to for the mask to fit correctly\u003c\/strong\u003e.\u003c\/h3\u003e\n\u003ch3\u003e- No part of this mask is actual metal.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio.\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003eBe sure to check out my mask info section to learn more about these masks: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3\u003e - This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.  You can use a heat gun or hair dryer to heat the \u003cstrong\u003eback\u003c\/strong\u003e of the mask until it becomes pliable. Set the shape you want by leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. Use common sense, please. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cem\u003eBy buying this piece you are directly supporting an independent artist. Thank you!\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410366709935,"sku":"inn1787909020797","price":153.0,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410366742703,"sku":"wsc1787909020798","price":163.2,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410366775471,"sku":"dgm1787909020799","price":201.45,"currency_code":"USD","in_stock":true},{"title":"D","offer_id":47410366808239,"sku":"edk1787909020800","price":165.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/snarl-half-mask--antique-silver_1.jpg?v=1787909026"},{"product_id":"snarl-half-mask-iridescent-purple","title":"SNARL HALF MASK- IRIDESCENT PURPLE","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM_480x480.jpg?v=1591839423\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHere is an image from 2009 of the old version painted!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/8D7E7BCF-B17D-4187-ABC6-2FF2FC6F39E5.jpg?v=1598317306\u0026amp;width=700\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBuyer will need to adjust the mask through gentle heat shaping ( see below) and by adjusting the attached strap slide. This mask will have some foam added for comfort but it may need more padding added with hot glue depending on individual fit. Please wear the elastic strap so that it goes over the widest part of the back of your head.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e- This is for one (1) painted, sealed and ready to wear urethane mask. It will come with an adjustable elastic strap and inside foam padding. \u003cstrong data-mce-fragment=\"1\"\u003ePadding may need to be cut down or added to for the mask to fit correctly\u003c\/strong\u003e.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e- These are produced one at a time in my own studio.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong data-mce-fragment=\"1\"\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBe sure to check out my mask info section to learn more about these masks: https:\/\/missmonster.myshopify.com\/pages\/mask-care-info\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e - Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e \u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e-This mask fits most faces but a perfect fit is not guaranteed. Cannot be worn with glasses.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e - This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.  \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eYou can use a heat gun or hair dryer to heat the \u003cstrong data-mce-fragment=\"1\"\u003eback\u003c\/strong\u003e of the mask until it becomes pliable.\u003c\/em\u003e\u003c\/span\u003e Set the shape you want by gently pressing to your face while warm and leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e \u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eBy buying this piece you are directly supporting an independent artist. Thank you!\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"A","offer_id":47410366841007,"sku":"lrr1787909023110","price":179.55,"currency_code":"USD","in_stock":true},{"title":"B","offer_id":47410366873775,"sku":"dtp1787909023111","price":176.7,"currency_code":"USD","in_stock":true},{"title":"C","offer_id":47410366906543,"sku":"shk1787909023112","price":171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/snarl-half-mask--iridescent-purple_1.jpg?v=1787909027"},{"product_id":"chophound-blank-ready-to-ship","title":"CHOPHOUND BLANK- READY TO SHIP","description":"\u003ch3\u003eEyes and flash should be dremeled off. You will get one of the masks pictured!\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e‘Made up of the original engineers of the robotic technology that produced such creations as the Robodogs and other cyborgs, The Chophounds are scavengers of the advanced tech of the Wastes. Each member hides their face while out on scrap reclamation to obscure their identity and to intimidate. Their unknown identities while \"on duty\" allows them to move unmasked within the Wastes as regular survivors without being harassed for their knowledge or rare and very valuable equipment. These engineers want to fix the mess they feel they had a hand in but need to do so without interruption or interference from outsiders who may get in the way of restorative plans that will take generations to unfold. Chophounds are also made up of children and apprentices who are being taught to use the recovered tech, all living in a single community ( location unknown). “\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eIf you want to hinge the jaw, cut along the teeth using a heat gun to soften the plastic and an x-acto knife to carefully slice through ( I recommend a dremel for this thicker batch!) . You may need to sand and then resculpt a few small areas using epoxy putty after cutting. You can then make or buy mask hinges , a chicago screw set and elastic . Use the tutorial here to see how to do this or just search \"resin blank hinging tutorial\" to find stuff like this!\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask. The eye holes will be dremeled open but buyer will need to refine the edges and the tear duct shape.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366939311,"sku":"rds1787909025522","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/chophound-blank--ready-to-ship_1.jpg?v=1787909030"},{"product_id":"opens-friday-aug-21st-2pm-pst-snarl-half-mask-blank-pre-order-will-not-ship-for-3-6-weeks","title":"( OPENS FRIDAY AUG 21st 2PM PST) SNARL HALF MASK BLANK- *** PRE-ORDER! WILL NOT SHIP FOR 3-6 WEEKS***","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e***THIS WILL SHIP IN OCTOBER\/NOVEMBER -THIS IS A PRE-ORDER*** \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003ePlease do not purchase a mask if you are unable to wait.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThis design is a revisit of my first urethane mask sculpt released in 2009! I wanted to redo the same concept with my current skills and quality. Here is a pic of the two masks together with the old version on the left. That is the only remaining copy I have in hand:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/eZy_Watermark_09-06-2020_04-27-49PM.jpg?v=1591839423\u0026amp;width=700\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003eThis is the popular faux silver half version of the old design: \u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/8D7E7BCF-B17D-4187-ABC6-2FF2FC6F39E5.jpg?v=1598317306\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e----Here is a tutorial on opening the mouth for breathing:\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2609.jpg?v=1591826327\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2610.jpg?v=1591826357\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2611.jpg?v=1591826397\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2612.jpg?v=1591826443\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2613.jpg?v=1591826487\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0087\/1002\/files\/IMG_2614.jpg?v=1591826513\u0026amp;width=700\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuyers will receive a fulfillment notification through the email provided at purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Any production delays will be mentioned on the updates page.\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe basics:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- This is for one (1) cast white urethane unpainted, unfinished mask.  Buyer will need to trim edges, sand and prep it for paint.\u003c\/h3\u003e\n\u003ch3\u003e- These are produced one at a time in my own studio. The buyer will need to sand\/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.\u003c\/h3\u003e\n\u003ch3\u003e- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing \/drying to secure the bond better. Score ( roughen) the inside mask's surface before gluing.\u003c\/h3\u003e\n\u003ch3\u003e- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort.\u003cstrong\u003e Some craft\/paint\/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided. \u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and \u003cstrong\u003ecannot be changed\u003c\/strong\u003e after the order is placed. No exceptions, sorry!\u003c\/h3\u003e\n\u003ch3\u003e- There are no refunds on pre-orders.\u003c\/h3\u003e\n\u003ch3\u003e- Please do not buy a mask if any of the above is an issue!\u003c\/h3\u003e\n\u003ch3\u003e- If you want any more info on buying from my shop please go through the FAQ\/policy page in my shop: http:\/\/missmonster.myshopify.com\/pages\/f-a-q\n\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMask info:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e- You will receive a BLANK white urethane mask. The finished photos are just an example of what the mask can look like when completed.\u003c\/h3\u003e\n\u003ch3\u003e- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.\u003c\/h3\u003e\n\u003ch3\u003e- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.\u003c\/h3\u003e\n\u003ch3\u003e- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.\u003c\/h3\u003e\n\u003ch3\u003e-\u003cstrong\u003eIf the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft\u003c\/strong\u003e. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.\u003c\/h3\u003e\n\u003ch3\u003e- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.\u003c\/h3\u003e\n\u003ch3\u003e-This mask fits most faces but a perfect fit is not guaranteed.\u003c\/h3\u003e\n\u003ch3\u003e- Do not use this as safety equipment or a welding mask or anything else but costuming. I am not responsible for injuries sustained through improper use of this mask.\u003c\/h3\u003e\n\u003ch3\u003e-\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBy purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"missmonster","offers":[{"title":"Default Title","offer_id":47410366972079,"sku":"lzl1787909025491","price":88.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/0655\/5311\/files\/opens-friday-aug-21st-2pm-pst-snarl-half-mask-blank--pre-order-will-not-ship-for_1.jpg?v=1787909030"}],"url":"https:\/\/melloway.shop\/collections\/masks.oembed?page=8","provider":"My Store","version":"1.0","type":"link"}